spacer.png, 0 kB

Suchen

Such-Schlüsselwörter chassis dyno
Insgesamt 19 Ergebnisse. Suche nach chassis dyno mit Google

Ergebnisse 1 - 19 von 19
1. Street Legal Dual-Engine Hot Rod
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
...ll like an Indy car. Two giant banks of header pipes. Completely hand-fabricated body and chrome-moly tube chassis. The craziest part of it all? He can drive it on the street. Priprism (look it up; it...
04.11.2009

2. LS1 in 1996 BMW Z3
(Partner- und Mitglieder-Blogs/engineswapdepot.com)
...k trunk floor and a weak single differential mount. A Randy Forbes differential kit was installed by A.B.S Chassis Fabrication to strengthen the mount and trunk floor as well as make more room for a d...
04.08.2009

3. The Sniper Lives: Twin Turbo, Viper V10 Powered Mustang Caught on Tape!
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
... We’re excited to see this monster get all the hiccups out of its system and start making numbers on the chassis dyno. This project has been a long term affair for Vanderschoor and the amount of wor...
02.07.2009

4. LS1 Powered 1985 Celica GTS
(Partner- und Mitglieder-Blogs/engineswapdepot.com)
... reported to get 30mpg highway and 22mpg in city. As I said before this car has seen a great life with the chassis seeing 330,000 miles, the engine has 65,000 miles, and the swap has 30,000. This 19...
12.06.2009

5. Redline Punches Time in the Face
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
...n Jackson Stewart was building it for Grand Am GS competition. Since that time the meticulously fabricated chassis has been enlisted into Time Attack duty. The engine, which was heavily mandated for G...
03.06.2009

6. Lingenfelter Engine Packages and Body Kit for the 2010 Camaro
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
... Intake - Professional installation, testing and calibration - Corsa stainless steel cat back exhaust - Chassis dyno report before & after installation - Excellent drivability, highway mileage...
04.05.2009

7. 1971 Pontiac GT-37: More than we could print
(Partner- und Mitglieder-Blogs/blog.hemmings.com)
...12-bolt Posi with a final drive ratio of 4.10:1. With the engine, transmission and body reunited with the chassis, Steve turned to Dale Dawson - owner of L.A. Trim in Lowell, Michigan - who reskinned...
24.03.2009

8. Chassis-Dyno Accidents
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
I nabbed four clips off of YouTube for this week’s videos, all of them showing what can go wrong on a chassis dyno. Many of us here have countless dyno pulls under our belts, and it’s easy to get slac
15.01.2009

9. Driving Impression: 1987 Nissan 200SX SE V6
(Partner- und Mitglieder-Blogs/blog.hemmings.com)
... other magazine tester who had taken one for a spin—“could use a little more power,” went the mantra—and a chassis dyno run putting out exactly 100 horsepower at the rear wheels would seem to confirm ...
26.11.2008

10. ProCharger - zusätzliche 150 PS für den Challenger 6.1L Hemi V8
(Partner- und Mitglieder-Blogs/musclecars.at)
...8;D program that consisted of more than 200 ProCharged-HEMI engine dyno sessions, followed by another 200+ chassis dyno sessions with ProCharged HEMI-powered Chargers and Ram trucks. As a result, ProC...
14.11.2008

11. Superformance baut zusammen mit ROUSH den MKIII-R Roadster
(Partner- und Mitglieder-Blogs/musclecars.at)
...: Superformance LLC, the leader in “Licensed Reproduction” replica and continuation component chassis of the 1960’s. As one of the first players in the industry, Superformance has o...
30.10.2008

12. Nismo Announces Tune-Up Parts for R35 GT-R
(Partner- und Mitglieder-Blogs/Archiv (Blogs, Mitglieder-Artikel))
...So, what are the parts then? Read on after the jump to find out. Headlining the Nismo lineup is their Chassis Package, which includes race-tuned Bilstein Damptronic adjustable dampers with stiffe...
29.08.2008

13. Der Hennessey Performance Dodge Challenger SRT600
(Partner- und Mitglieder-Blogs/musclecars.at)
...ssembly room • Cylinder head porting/machining shop • Welding and metal fabrication shop • Dynojet 248C chassis dynamometer rated to 1800 rear wheel hp • Chassis dynamometer wideband air/fuel anal...
25.08.2008

14. Swedish Speedfreaks Create 360SX
(Partner- und Mitglieder-Blogs/Archiv (Blogs, Mitglieder-Artikel))
...ing shoehorned into a tiny car or a motor from an entirely different manufacturer to that of the recipient chassis. This car ticks both boxes. Thanks to some enterprising Swedes, this S13 200SX is now...
05.05.2008

15. Video: AMS Cracks 1100hp With Evo VIII
(Partner- und Mitglieder-Blogs/Archiv (Blogs, Mitglieder-Artikel))
...on both the dragstrip and on the dyno. That amount of power is simply frightening, and woe betide any full-chassis drag car foolish enough to... American tuners AMS Performance have managed to build w...
23.04.2008

16. Cool Car Club: Team Solstice
(Partner- und Mitglieder-Blogs/blog.cardomain.com)
...the motor on Madmods' yellow Solstice at Vividracing's dyno, and now the car accelerates so violently that chassis flex threatens to be a problem. Fabricating a brace, courtesy of Randy at DDM, helped...
05.04.2008

17. 67 Mustang Fastback with Cobra Venom
(Partner- und Mitglieder-Blogs/engineswapdepot.com)
...6 RWHP and 505 FPT. The suspension has been completely upgraded with coil overs all over riding on a Martz Chassis. The Mustang has been switched over to rack and [...] Speed Inc - PTSC out of Schaum...
04.01.2008

18. GT-R Dyno Results Published
(Partner- und Mitglieder-Blogs/Archiv (Blogs, Mitglieder-Artikel))
...ain isn't there to absorb power, engine dyno numbers are always higher than figures obtained from a hub or chassis dyno. Nobody knows which kind of dynamometer Nissan used for the GT-R, but one thing...
18.12.2007

19. Drop-Top Motoring, VIP Style
(Partner- und Mitglieder-Blogs/Archiv (Blogs, Mitglieder-Artikel))
It's certainly a unique ride, and it's unusual for such a heavily-modified car like this too look so... classy. The good news is that this car is for sale, and if you're genuinely interested in obtai
05.09.2007

<< Anfang < Vorherige 1 Nächste > Ende >>

spacer.png, 0 kB