Search

1. 1978 Camaro with a Supercharged LS3

Tuesday, 24 May 2016 Content / engineswapdepot.com / 1978 Camaro with a Supercharged LS3

... Fiberglass front, hood, doors, trunklid, and bumpers found their way on the Camaro. To complete the appearance change he made the rear window smaller and added a 1970 steel rear panel with signature four brake lights. The engine has been ...
... Fiberglass front, hood, doors, trunklid, and bumpers found their way on the Camaro. To complete the appearance change he made the rear window smaller and added a 1970 steel rear panel with signature four brake lights. The engine has been ...

2. Custom Land Cruiser with a 1UZ

Sunday, 08 May 2016 Content / engineswapdepot.com / Custom Land Cruiser with a 1UZ

... driveshaft and window glass. Source: Allers Rods and Customs (build album) and N1 4×4 via Crossbred Nation | 2016-05 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot | land cruiser ...
... harness. Power goes to the rear wheels through a Land Rover Discovery rear end with 3.75 gears. Andre modified the rear end from an offset differential location to a centered location. The only thing Andre didn’t work on himself was the ...

3. 1948 Studebaker with a Skyline Drivetrain

Tuesday, 22 March 2016 Content / engineswapdepot.com / 1948 Studebaker with a Skyline Drivetrain

... because it was small and light but also had the unique wrap-around back window. After selling the engine, three-speed transmission, front and rear suspension on a forum he soon got started swapping most of the components from a 1990 Nissan R32 ...
... because it was small and light but also had the unique wrap-around back window. After selling the engine, three-speed transmission, front and rear suspension on a forum he soon got started swapping most of the components from a 1990 Nissan R32 ...

4. Lexus LC500

Monday, 11 January 2016 Content / radical-mag.com / Lexus LC500

... venture | Lexus | lexus lc500 | lexus rc f | NAIAS 2016 | new bmw sportscar | new toyota supra | radical-mag | reardreive premium platform | toyota ft1 | toyotda ...
... prevText:"<", nextText:">", slideshow:true }); }; var timer_metaslider_8977 = function() { var slider = !window.jQuery ? window.setTimeout(timer_metaslider_8977, ...

5. <div>Build-Threads Project Garage: Plumbing & Driveway</div>

Monday, 21 December 2015 Content / build-threads.com / <div>Build-Threads Project Garage: Plumbing & Driveway</div>

... ends. The pipe that tees in from the right hand side is actually connected to a downpipe outside our bedroom window, which was never connected to anything, it would just run off to the ground. It’s good to know that everything will the ...
... storm-water system that the house uses. In my case, after consulting with a plumber and getting some documents from my local council, it was confirmed that my storm-water system travelled rearwards and concluded at an easement that ran along ...

6. For Sale: The First V8 Swapped Porsche In The World

Tuesday, 08 December 2015 Content / engineswapdepot.com / For Sale: The First V8 Swapped Porsche In The World

... rear torsion bars and 911 front bars. No bangs, no rough ride, no clunks! The car is super tight in corners, and comfortable on the straights! Rubber bushings are in great shape, no degradation or rubber coming apart. 911S tie rod ends are ...
... doors cut and window assemblies removed. Some close cell foam pads are in place to dull sound. Door release is via quick release cord. -HEADLINER Headliner has bee replaced with the same closed cell foam. -AC/HEAT No heat or AC. -STEERING ...

7. east coast attacks

Saturday, 28 November 2015 Content / lowtechblog.blogspot.com / east coast attacks

... we pulled the rear end and changed the gears to make it faster off the line.« They got it all finished up just in time to take it to the 2013 Grand National Roadster Show where it was accepted into the suede place. And even better: They ...
... done an amazing job making the Coupe look like it’s an old build. And indeed there’s a little bit of local hot rod history hiding in this car. Like so many three window coupes of the era, the ’34 Coupe originally was supposed ...

8. east coast style

Saturday, 28 November 2015 Content / lowtechblog.blogspot.com / east coast style

9. Builder Spotlight: Matt Clark

Thursday, 22 October 2015 Content / build-threads.com / Builder Spotlight: Matt Clark

... was lowered utilizing lowering blocks for the rear leaf springs and CPP drop spindles for the front suspension (with new shocks on all four corners). The factory, mag-style wheels were replaced with dramatic, restored 16×9 vintage Epsilon ...
... the front bumper, air-dam, fenders and header panel were replaced, window tint was removed, a gloss white vinyl body wrap was applied…and 17 inch Fifteen52 Tarmacs were added. The wheels were a concession to the period-correct appearance ...

10. Project Honda City Turbo II – Exhaust, interior, FINITO!

Sunday, 26 April 2015 Content / build-threads.com / Project Honda City Turbo II – Exhaust, interior, FINITO!

... we left off, I did get another Hyper Turbo decal made up in reverse so we can stick it on the inside of the rear window. I also grabbed some black vinyl so we have the option of replacing the one on the front with a solid windscreen banner like ...
... we left off, I did get another Hyper Turbo decal made up in reverse so we can stick it on the inside of the rear window. I also grabbed some black vinyl so we have the option of replacing the one on the front with a solid windscreen banner like ...