Search

1. Porsche Boxster with a Twin-turbo Audi V6

Monday, 08 August 2016 Content / engineswapdepot.com / Porsche Boxster with a Twin-turbo Audi V6

... produces around 300 horsepower. The team hopes to build another engine for the next season with a 500 horsepower goal. The Audi engine bolted right up to the factory Porsche transaxle since they both use the same pattern. Source: Angry ...
... produces around 300 horsepower. The team hopes to build another engine for the next season with a 500 horsepower goal. The Audi engine bolted right up to the factory Porsche transaxle since they both use the same pattern. Source: Angry ...

2. MGB with a Mk1 Supra Drivetrain

Sunday, 28 February 2016 Content / engineswapdepot.com / MGB with a Mk1 Supra Drivetrain

... The factory Toyota gauges were installed inside an earlier MGB model dash while the battery and fuel cell were relocated inside the trunk. Even the Supra wheels were able to be used because they conveniently matched the MG bolt pattern. Lorne ...
... The factory Toyota gauges were installed inside an earlier MGB model dash while the battery and fuel cell were relocated inside the trunk. Even the Supra wheels were able to be used because they conveniently matched the MG bolt pattern. Lorne ...

3. Project 510: Short Shifting

Friday, 10 July 2015 Content / build-threads.com / Project 510: Short Shifting

... turned into half a day of overcoming obstacles. Firstly, there wasn’t enough room to get to the bolts that hold the shifter plate to the gearbox, so we had to cut a larger access hole in the tunnel, which meant covering the interior with ...
... welding blankets. Secondly, the bolts were way too tight and proved difficult to remove. Thirdly, my gearbox had a strange bolt pattern, with one out of the six bolts on the shifter plate being oversized, which didn’t match the pre-machined ...

4. Project Honda City Turbo II – Exhaust, interior, FINITO!

Sunday, 26 April 2015 Content / build-threads.com / Project Honda City Turbo II – Exhaust, interior, FINITO!

... photo of the two cars together. We made it! Back at Tony’s after a dumpling feast to celebrate. Great day. Ever noticed this pattern on JDM windscreens? It’s much more noticable with a polariser filter or when wearing polarised ...
... ‘bay to get the arm out. This is the sucka. The bushing is so loose that you can easy push it straight through the arm. And here’s the replacement ready to go. Tidy! Squeezed back in and bolted up. The arm bolts to a ...

5. Project Honda City Turbo II – Engine refresh

Wednesday, 06 August 2014 Content / build-threads.com / Project Honda City Turbo II – Engine refresh

... in guides at all. Every second spring seat has left a pattern like this one, but the ones with the pattern aren’t all exhaust or all intake so that’s interesting. Here are our spring seats, springs and retainers awaiting clean up. And ...
... and washers and the thermostat. The head, rocker assembly and camshaft will all go off for hydroblasting. First thing to remove is the rocker arm assembly. 10 easily accessible bolts hold it down. Despite all the grit in this engine ...

6. Ferrari F40 LM Restoration

Tuesday, 06 August 2013 Content / build-threads.com / Ferrari F40 LM Restoration

... car, as the ‘prize’, have a look at a few details of the Michelotto front suspension. Not a simple bolt on so we will have to make some minor changes to the pick up points, but that will then enable us to move forward and hopefully ...
... it will spend most of its time on the track, it will occasionally venture onto the street. The car would therefore be effectively uninsured.The R888 is almost as good a tire with a crazy tread pattern, as below, which does not really suit the ...