Search

1. Custom Jeep Cherokee with a Turbo HEMI V8

Monday, 15 August 2016 Content / engineswapdepot.com / Custom Jeep Cherokee with a Turbo HEMI V8

... thread) and/via BangShift | 2016-08 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot | Cherokee ...
... was shortened 17″ to give it a 110″ wheelbase. The body had to be notched in a few locations to clear the chassis. One of the first planned engines was going to be an AMC 401 V8 with an Indy 401-3 intake, Ford Motorsports 80 lb ...

2. Toyota 86 with a VR38DETT

Thursday, 14 July 2016 Content / engineswapdepot.com / Toyota 86 with a VR38DETT

... using a Full Blown Motorsports conversion kit. When completed the 86 will still retain a full interior, stereo and include an aftermarket AC system from RenCool. It will be used for a combination of time attack, roll racing, and street. Full ...
... However recently they decided to completely overhaul the 86 with a powertrain that has the potential to make 1000+ horsepower. The 2.0 L 4U-GSE flat-four went through several iterations starting with a AVO turbo kit, then a Forged Performance ...

3. Crusher Camaro Receives a Supercharged 427 LS3

Monday, 04 July 2016 Content / engineswapdepot.com / Crusher Camaro Receives a Supercharged 427 LS3

... the entire installation covered in three videos. Now Tony and Lucky are getting their chance to work on the Crusher Camaro. This time around the guys are removing the LS7 and installing a Blueprint Engines 427 ci LS3 with a Magnuson supercharger. ...
Crusher Camaro Receives a Supercharged 427 LS3 | Back in 2013 David Freiburger and Mike Finnegan took the Crusher Camaro and installed a Mast Motorsports LS7 on the PRI show floor in front of fans. You can click on the previous link to see ...

4. Nissan 350Z with a Turbo VR6

Wednesday, 04 May 2016 Content / engineswapdepot.com / Nissan 350Z with a Turbo VR6

... asking price of $25,000. He is also open to trades of equal value. Source: My350Z (build thread) and SEO Motorsports FB page via ESD readers Chris and Ñathanael | 2016-05 | Christopher Christopher | Article | engineswapdepot.com ...
... asking price of $25,000. He is also open to trades of equal value. Source: My350Z (build thread) and SEO Motorsports FB page via ESD readers Chris and Ñathanael | 2016-05 | Christopher Christopher | Article | engineswapdepot.com ...

5. The Electric Ferrari

Tuesday, 29 March 2016 Content / engineswapdepot.com / The Electric Ferrari

... Michael Bream at EV West. Together they came up with a system that would use three electric motors and 48 batteries to produce almost double the horsepower and a lot more torque. The Ferrari uses three AC51 HPEVS electric motors arranged in ...
... given a 3.23 1st gear and 3.71 axle ratio. The output shaft is connected to an Aasco Motorsports 8 lb flywheel, SPEC pressure plate, Tilton clutch, and a Porsche G50/2005 transaxle which is mounted in the car upside down. The battery pack ...

6. The Justang: A Subaru Justy Wrapped Around a Mustang Cobra

Sunday, 07 February 2016 Content / engineswapdepot.com / The Justang: A Subaru Justy Wrapped Around a Mustang Cobra

The Justang: A Subaru Justy Wrapped Around a Mustang Cobra | Circuit Motorsports specializes in Subaru servicing and performance upgrades. So when they decided they were going to enter the $2014 Grassroots Motorsports Challenge it would have ...
... on Oct 12, 2015 at 3:41pm PDT To see build photos please visit the project’s Facebook album or the build thread on NASIOC. | 2016-02 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot | Justy ...

7. Building a BMW i8 with a Twin-turbo S63 V8

Monday, 07 December 2015 Content / engineswapdepot.com / Building a BMW i8 with a Twin-turbo S63 V8

... three-cylinder in the back and an electric motor in the front. This gives the car it’s hybrid virtual 4WD system. GRT had no use for either of these systems since this car was going to be pure race inspired and going fuel and RWD only. GRT ...
... will be using a 4.4 L S63B44T0 V8 which is BMW’s Motorsports version of the N63. The S63 from the factory uses two twin-scroll turbochargers with a pulse tuned cross-engine exhaust manifold. GRT hasn’t said exactly what they will be modifying ...

8. For Sale: Lexus IS300 with a LS3

Sunday, 06 December 2015 Content / engineswapdepot.com / For Sale: Lexus IS300 with a LS3

... in several build threads. You can view more photos here or visit the source link below for full details along with build threads. Source: NoRotors via Owner | 2015-12 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot ...
... adds about 40-50 horsepower. The car’s best quarter-mile was 11.8 sec at 120 mph. Connected to the V8 is a T-56 six-speed transmission. The car was built by Dedicated Motorsports as a test mule for their swap kit and was well documented ...

9. ICON CJ3B with a VW TDI Diesel

Tuesday, 17 November 2015 Content / engineswapdepot.com / ICON CJ3B with a VW TDI Diesel

... costing about three times more than their FJ models and twice as much as their Broncos. ICON built two more after deciding to use an aluminum body and diesel power plant. ICON started with a full aluminum body made by Aqualu in British Columbia, ...
... Coty Built which is a division of HPA Motorsports. The engine transfers its 165 horsepower and 270 lb-ft of torque to a AX15 five-speed manual transmission and through a New Process 231 transfer case onto front and rear Dynatrac Dana 44 axles ...

10. Lotus Exige with a BMW V10

Wednesday, 21 October 2015 Content / engineswapdepot.com / Lotus Exige with a BMW V10

... was widened. Then he had the entire Lotus painted in BMW carbon black metallic. Even through I read all 45 page build thread I had to use Google translate which can easily be lost at times. I tried my best to understand the modifications Johan ...
... to larger Porsche 997 GT3 brakes. The front and rear suspension were upgraded with components from a Porsche 996 and KH Motorsport adjustable shocks. The wheels are a set of ATS GTR Motorsports with 9×18 front and 11×18 rear. After ...