Search

1. A Fabricator’s Project – Audi A4

Saturday, 27 August 2016 Content / build-threads.com / A Fabricator’s Project – Audi A4

... had project cars, what a world that would be… Click here for more Audi builds. Click here for more fabrication-based builds. CLICK HERE for the full build thread. | 2016-08 | Anthony Crivelli | Article | build-threads.com ...
... think you’ll be as gobsmacked as I was when I first saw the 3D scanning, CAD work, 3D printed parts, and fabrication already taking place. Rest assured, when it’s complete, this will be one VERY sorted A4. If only all fabricators ...

2. MGA with a Supercharged Coyote V8

Monday, 22 August 2016 Content / engineswapdepot.com / MGA with a Supercharged Coyote V8

... Off Road Racing in Darley Dale, UK for a roll bar. After David talked to the brothers about the project he knew it was something he had to be involved in. In the beginning Colin the car to be MG powered. Then he hoped to achieve his power goals ...
... six-speed transmission, Milner Off Road Racing CV drive shaft, and Strange Engineering 9″ rear end with a 12-bolt drop out. Although this is their second time at Bonneville it is only their first time competing. Their previous attempt ...

3. Custom Jeep Cherokee with a Turbo HEMI V8

Monday, 15 August 2016 Content / engineswapdepot.com / Custom Jeep Cherokee with a Turbo HEMI V8

... was shortened 17″ to give it a 110″ wheelbase. The body had to be notched in a few locations to clear the chassis. One of the first planned engines was going to be an AMC 401 V8 with an Indy 401-3 intake, Ford Motorsports 80 lb ...
... next engine choice was a 454 V8 built by Herman Lewis. The motor came with a 4″ Moldex crank, Hemi Adkins heads, solid roller, Mondello flexplate, HLR intake, and C&S Dominator carb. This combo produced 712 horsepower on a dyno. Greg ...

4. ICON’s Reformer Chevrolet Caprice

Sunday, 14 August 2016 Content / engineswapdepot.com / ICON’s Reformer Chevrolet Caprice

ICON’s Reformer Chevrolet Caprice | Jonathan Ward’s first sentence in his newest video was “this is a weird one” and I would agree. This fourth generation (1991-1996) Chevrolet Caprice might be one of the weirdest projects ...
... ICON has ever built. Jonathan says that ICON tends to not work on late-70’s, 80’s and 90’s cars because there is a lot of plastic and “no soul.” But after talking to the client Jonathan eventually came around and ...

5. Oldsmobile Cutlass Supreme with a Turbo Buick V6

Tuesday, 09 August 2016 Content / engineswapdepot.com / Oldsmobile Cutlass Supreme with a Turbo Buick V6

Oldsmobile Cutlass Supreme with a Turbo Buick V6 | Dimitar Kaleev is currently for sale“>selling his custom 1996 Oldsmobile Cutlass Supreme. He purchased it as his first car in 1999 and then went about upgrading every major component ...
Oldsmobile Cutlass Supreme with a Turbo Buick V6 | Dimitar Kaleev is currently for sale“>selling his custom 1996 Oldsmobile Cutlass Supreme. He purchased it as his first car in 1999 and then went about upgrading every major component ...

6. Porsche 914 with a Subaru EJ22

Wednesday, 20 July 2016 Content / engineswapdepot.com / Porsche 914 with a Subaru EJ22

Porsche 914 with a Subaru EJ22 | A young man from Colorado has been documenting his journey working on a Subaru-powered 1973 Porsche 914. He purchased the car with a Subaru EJ22 flat-four already installed using a Kennedy Engineering conversion ...
... kit. Since then he has published 23 videos showing a tremendous amount of work improving the car and repairing the previous owner’s work. Below is the entire playlist starting with the first episode. Source: SMB Garage and Subapoo | ...

7. Toyota 86 with a VR38DETT

Thursday, 14 July 2016 Content / engineswapdepot.com / Toyota 86 with a VR38DETT

... 600 horsepower still was not enough so they decided to add a HKS 4.1 L stroker kit and a HKS GT1000 symmetrical twin-turbo kit using two HKS GT2-7867 turbochargers. One of the first issues they ran into was the height of the VR38 engine. ...
Toyota 86 with a VR38DETT | StreetFX has spent the past four years building their Toyota 86 into a monster. It started in 2012 when they purchased a new 86 for mild track and street use. With each modification the car got faster and more powerful. ...

8. california blue

Wednesday, 15 June 2016 Content / lowtechblog.blogspot.com / california blue

california blue | The 1964 Chevrolet Impala is kinda like the blue jeans of classic cars. It’s got a timeless styling, a solid construction, and it fits whatever look you’re after. In other words, you’ll be hard pressed to ...
... the timeless hours he spent at his dad’s garage. Garry Odbert is a true old school hot rodder, still owning his very first roadster from high school days. It’s also Garry who taught Dylan the correct use of welder, wrench and power ...

9. Acura NSX with a Supercharged C32

Tuesday, 07 June 2016 Content / engineswapdepot.com / Acura NSX with a Supercharged C32

Acura NSX with a Supercharged C32 | Car stereo company Clarion started a new division several years ago with the goal of restoring cars. Their first project was restoring a beautiful 1974 BMW 2002 to a very high level. For their second project ...
Acura NSX with a Supercharged C32 | Car stereo company Clarion started a new division several years ago with the goal of restoring cars. Their first project was restoring a beautiful 1974 BMW 2002 to a very high level. For their second project ...

10. Ford Falcon XR6 Turbo Ute – Part 5

Monday, 02 May 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 5

... prep for paint. First step was to remove all the body panels, leaving a just a shell and all the bar work. The rear tub comes off with 6 bolts now, which makes it super easy to get access to the rear end. With one team working on removing the ...
... p/h to scotch-bright the entire cage. Sharman on the other hand paid us to work on the car, finishing off the rear end and putting $80 into our beer account. With the cage and rear chassis all prepped it was time to paint. Colour was decided; ...