Search

1. Carbon Fiber Alfa Romeo

Wednesday, 20 January 2021 Content / engineswapdepot.com / Carbon Fiber Alfa Romeo

... throttle bodies and runs on a MoTeC M1 ECU. A close-ratio five-speed manual transmission sends power through a lightweight driveshaft to a titanium rear axle with a limited-slip differential. The car stops thanks to a Superleggera six-piston ...
... weighing 70 kg (154 lb) less than a steel body. The company further reduces weight in the suspension with titanium upper and lower control arms, titanium hubs, and titanium wheel studs and nuts. They also install their GTA-R “Big Spindle” billet ...

2. Mini with a Mid-engine Turbo B18

Wednesday, 31 August 2016 Content / engineswapdepot.com / Mini with a Mid-engine Turbo B18

... horsepower to the rear wheels. That may not sound like a lot in the current horsepower wars but it’s a 545% increase over the factory 55 horsepower. The empty engine bay was put to good use holding a fuel cell and relocated battery. The ...
... they established the direction for the project. To give the car the best weight distribution the engine would be placed behind the driver where the back seat used to be. They soon realized this project would reach beyond their skills so they ...

3. For Sale: Project Rollsmokey

Tuesday, 23 August 2016 Content / engineswapdepot.com / For Sale: Project Rollsmokey

... On a nice turbo the engine makes 300 horsepower and 760 lb-ft of torque at the wheels on 32 psi of boost. Behind the engine sits a RH47 four-speed automatic transmission and a Dana 60 rear end with 3.54 gears. If you have wanted to own a piece ...
... 93 Dodge Ram 12V Intercooler 1995 Dodge Ram 2500 MBRP 4 Inch Turbo Back Exhaust with Muffler Transmission: RH47 4 Speed Automatic Overdrive Transmission rebuilt BD Diesel 47RH Transmission Build it kit BD Diesel Valve Body Upgrade BD Diesel ...

4. MGA with a Supercharged Coyote V8

Monday, 22 August 2016 Content / engineswapdepot.com / MGA with a Supercharged Coyote V8

... six-speed transmission, Milner Off Road Racing CV drive shaft, and Strange Engineering 9″ rear end with a 12-bolt drop out. Although this is their second time at Bonneville it is only their first time competing. Their previous attempt ...
... with a larger Jaguar engine. But they realized they were never going to make enough power to reach 200 mph with any of those engines. To solve the problem the team turned to modern Ford power. Between the front wheels sits a 5.0 L Coyote V8 ...

5. VW Eos with a 3.6 L VR6

Wednesday, 17 August 2016 Content / engineswapdepot.com / VW Eos with a 3.6 L VR6

... paint. The car rides on an HP Drivetech air suspension with an Accuair controller. Source: Projekt Eos R36 FB page via ESD reader Krešimir | 2016-08 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot ...
... produces 296 horsepower (221 kW) and 258 lb-ft (350 Nm) of torque. It is connected to an automatic transmission probably a six-speed DSG. Body modifications include a Scirocco R front, widened wheel arches, and all covered in Lamborghini grey ...

6. VW Eos with a VR6

Wednesday, 17 August 2016 Content / engineswapdepot.com / VW Eos with a VR6

7. Custom Jeep Cherokee with a Turbo HEMI V8

Monday, 15 August 2016 Content / engineswapdepot.com / Custom Jeep Cherokee with a Turbo HEMI V8

... was shortened 17″ to give it a 110″ wheelbase. The body had to be notched in a few locations to clear the chassis. One of the first planned engines was going to be an AMC 401 V8 with an Indy 401-3 intake, Ford Motorsports 80 lb ...
... wanted more. So he installed a Bullseye S366 turbocharger which should help the engine produce around 500 horsepower to the wheels on a modest 5 psi of boost. Making sure the power gets to the ground will be a custom driveshaft from The Driveshaft ...

8. American Iron with Swedish Power

Thursday, 11 August 2016 Content / engineswapdepot.com / American Iron with Swedish Power

... S-10 truck with a V8 and rear mounted turbo. It was a blast to drive and Robin loved the turbo feel but it wasn’t very practical and the attention it gained from the Police got tiresome. So he decided his next vehicle needed to be a sleeper ...
... urethane small-block Chevy mounts connected to custom steel mounts made by Robin. The oil pan needed to be notched to clear the Nova steering linkage. The engine produces about 275 horsepower at the wheels thanks to a RSI stage 2 camshaft ...

9. ICON 1977 Bronco with a Coyote V8

Monday, 08 August 2016 Content / engineswapdepot.com / ICON 1977 Bronco with a Coyote V8

ICON 1977 Bronco with a Coyote V8 | Jonathan Ward recently took their newest ICON BR #34 out for a test drive. This project started with a 1977 Ford Bronco which is a first for ICON. They usually select 1975 or earlier Ford Broncos because ...
... sits a 5.0 L Coyote V8 that produces 426 horsepower and 402 lb-ft of torque. Behind it is a Ford 4R75W four-sped automatic transmission connected to a Atlas II part time transfer case. Power is sent to all four wheels through Dynatrac Dana 44 ...

10. Group 5 Inspired BMW E21

Sunday, 17 July 2016 Content / engineswapdepot.com / Group 5 Inspired BMW E21

... Pro turbocharger. The rest of the drivetrain will consist of a TT Industries five-speed sequential transmission with a Tilton triple-plate clutch and Kayne Barrie Motorsport BMW LSD with 3.85 gears. They body when finished will be hand ...
... formed from aluminum and look similar to the Faltz Motorsports E21 in both shape and Jagermeister livery. The only difference will be the front fenders will be wider to clear the 18 inch wheels. It will sit on a custom tube chassis with E38 ...