Search

1. The 1939 Plymouth Radial Air Truck Visits Jay Leno’s Garage

Friday, 02 September 2016 Content / engineswapdepot.com / The 1939 Plymouth Radial Air Truck Visits Jay Leno’s Garage

... tube chassis that extended the frame several inches in the front to hold the engine. The drivetrain consists of a custom pulley system off the front of the engine down to a boat V-drive. Then the power goes through a custom driveshaft into a ...
... tube chassis that extended the frame several inches in the front to hold the engine. The drivetrain consists of a custom pulley system off the front of the engine down to a boat V-drive. Then the power goes through a custom driveshaft into a ...

2. Ford Falcon XR6 Turbo Ute – Part 3

Saturday, 23 April 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 3

Ford Falcon XR6 Turbo Ute – Part 3 | In the third instalment of the Nulon / Impossible Fabrications XR6 Turbo Ute, we see the front end converted to a tube frame setup, and a special one-off exhaust fabricated all the way ...
Ford Falcon XR6 Turbo Ute – Part 3 | In the third instalment of the Nulon / Impossible Fabrications XR6 Turbo Ute, we see the front end converted to a tube frame setup, and a special one-off exhaust fabricated all the way ...

3. Ford Falcon with a Coyote V8

Thursday, 07 April 2016 Content / engineswapdepot.com / Ford Falcon with a Coyote V8

... he realized it would need to be lowered six inches. To achieve this height a custom tube frame would need to be built. Once the floorboards were cut out the owner began building the custom chassis using the Mustang II crossmember as a starting ...
... he realized it would need to be lowered six inches. To achieve this height a custom tube frame would need to be built. Once the floorboards were cut out the owner began building the custom chassis using the Mustang II crossmember as a starting ...

4. Revisiting the ETS Drift Ute

Sunday, 21 February 2016 Content / build-threads.com / Revisiting the ETS Drift Ute

5. east coast attacks

Saturday, 28 November 2015 Content / lowtechblog.blogspot.com / east coast attacks

... to notch the firewall and modify the radiator. The Edelbrock triple-carb setup was added along with some rebuilt Stromberg 97s. Jason also made a nice set of headers from 1936 Ford torque tubes. When Matt and Isaac got the 34 Coupe in 2012, ...
... Jason finally found it through an ad he had seen in the local newspaper. When he got it the lower 6 inches were missing and the body was held together by two pieces of the roof and the doors. Luckily the frame was in ok condition. Jason knew ...

6. east coast style

Saturday, 28 November 2015 Content / lowtechblog.blogspot.com / east coast style

7. What I’m Watching: The Fabricator channel

Tuesday, 24 November 2015 Content / build-threads.com / What I’m Watching: The Fabricator channel

What I’m Watching: The Fabricator channel | It’s like someone went and made a channel specifically for us! So far the series has videos detailing how to make a time attack roll cage and a tube frame front end, amongst other various fabrication ...
What I’m Watching: The Fabricator channel | It’s like someone went and made a channel specifically for us! So far the series has videos detailing how to make a time attack roll cage and a tube frame front end, amongst other various fabrication ...

8. 1986 Buick Grand National with a Twincharged LSA

Monday, 21 September 2015 Content / engineswapdepot.com / 1986 Buick Grand National with a Twincharged LSA

... been greatly reinforced. The frame was also notched in the front for the LSA front accessories and the rear to hold the Mickey Thompson 305/35-18 tires. A new chrome-moly tube frame in the works that will greatly increase strength and rigidity. ...
... engine produces anywhere from 783 hp / 778 lb-ft of torque and 965 hp / 931 lb-ft of torque to the rear wheels depending on where the boost controller is set at. The Grand National is still currently using the factory frame although it has ...

9. V12 From Two Toyota I6 Engines Update 3

Friday, 03 April 2015 Content / engineswapdepot.com / V12 From Two Toyota I6 Engines Update 3

V12 From Two Toyota I6 Engines Update 3 | Since our last update the builder has continued working on the full tube frame, suspension, and plumbing for the two Garrett GTX-3076 turbochargers. If you haven’t been following this project, ...
V12 From Two Toyota I6 Engines Update 3 | Since our last update the builder has continued working on the full tube frame, suspension, and plumbing for the two Garrett GTX-3076 turbochargers. If you haven’t been following this project, ...

10. 1951 Jaguar XK120 Custom With E-Type Engine

Wednesday, 11 February 2015 Content / engineswapdepot.com / 1951 Jaguar XK120 Custom With E-Type Engine