Search

1. Der Biss ins Pony

Wednesday, 30 June 2021 Content / Blog / Der Biss ins Pony

... sind mitten in Schweden in der Nähe von Stockholm, die Sonne brät vom Himmel und alles ist ein bisschen unwirklich. Der jugendlicher-als-er-ist aussehende Mann strahlt noch breiter als die schwedische Sonne, steigt aus, öffnet ...

2. American Iron with Swedish Power

Thursday, 11 August 2016 Content / engineswapdepot.com / American Iron with Swedish Power

... Racing digital gauge panel into the factory Nova console. From the beginning of the project Robin made a point to keep the Nova looking as stock as possible. The only clue on the outside that there is something different is the Volvo slash ...

3. Unimog with a Mercedes M123

Wednesday, 03 August 2016 Content / engineswapdepot.com / Unimog with a Mercedes M123

... with the shop’s other Unimog, a tan stock 1974 406 model. They chose Unimogs over a modified truck because of their strength from the factory. The dark 1959 404 originally came with a 2.2 L Mercedes M180 inline-six which produced around ...

4. Mazda RX-7 with a VR6

Thursday, 21 July 2016 Content / engineswapdepot.com / Mazda RX-7 with a VR6

Mazda RX-7 with a VR6 | This little hybrid is called The Ratchet RX-7. Under the hood of this 1988 Mazda RX-7 sits a stock Volkswagen VR6 and a Precision 6266 turbocharger running off a Megasquirt EFI system. While out at I29 Dragway it made ...

5. How To Swap a 3S-GE BEAMS into a Toyota AE86 Video

Wednesday, 22 June 2016 Content / engineswapdepot.com / How To Swap a 3S-GE BEAMS into a Toyota AE86 Video

... crossmember 1″ spacers manual steering rack or mod transmission housing to allow power steering to fit remove under hood bracing above engine specific MAF sensor and mesh when using stock ECU modded wiring harness if using stock fuel pressure ...

6. Abarth 595

Tuesday, 21 June 2016 Content / radical-mag.com / Abarth 595

... Das manuelle 5-Gang-Getriebe wird zwar über einen etwas gar langen Stock bedient, doch die Wege sind kurz, präzis, knackig, die Übergänge bestens; es macht halt Freud, mal wieder fleissig zwischen den Zahnrädern zu wühlen. ...

7. Ford Ranger 4×4 with a Cummins 4BT

Tuesday, 21 June 2016 Content / engineswapdepot.com / Ford Ranger 4×4 with a Cummins 4BT

... engine. Zach installed the engine using stock rubber 3.0 L V6 mounts and bolted them to custom built engine plates. The transmission was installed using a 1984 Bronco II crossmember. This particular crossmember was used because it has a unique ...

8. McLaren 675LT Spyder

Wednesday, 08 June 2016 Content / radical-mag.com / McLaren 675LT Spyder

... Aber immerhin. Ach, wie haben wir so ein bisschen fies auf den Stockzähnen gelächelt, als McLaren den 675LT vorstellte. LT steht ja für «long tail», und wir schrieben damals: «Am bekanntesten sind wohl die Langheck-Versionen ...

9. BMW E30 with a Turbo S54

Sunday, 29 May 2016 Content / engineswapdepot.com / BMW E30 with a Turbo S54

10. Nissan 350Z with a Turbo VR6

Wednesday, 04 May 2016 Content / engineswapdepot.com / Nissan 350Z with a Turbo VR6

... a MS3-Pro engine management system. The owner was nice enough to draw a detailed schematic for anyone wanting to install a VR6 engine in a 350Z using the stock wiring harness. The owner made a custom bellhousing adapter which allowed the factory ...