Search

1. Custom Mini Nova is Powered by a Kawasaki Ninja Inline-four

Sunday, 21 August 2016 Content / engineswapdepot.com / Custom Mini Nova is Powered by a Kawasaki Ninja Inline-four

Custom Mini Nova is Powered by a Kawasaki Ninja Inline-four | You are looking at a custom miniature 1970 Chevy Nova that was built by one creative Missourian. The body was created using plywood and foam for the shape to which fiberglass was ...

2. Group 5 Inspired BMW E21

Sunday, 17 July 2016 Content / engineswapdepot.com / Group 5 Inspired BMW E21

... formed from aluminum and look similar to the Faltz Motorsports E21 in both shape and Jagermeister livery. The only difference will be the front fenders will be wider to clear the 18 inch wheels. It will sit on a custom tube chassis with E38 ...

3. Ford Ranger 4×4 with a Cummins 4BT

Tuesday, 21 June 2016 Content / engineswapdepot.com / Ford Ranger 4×4 with a Cummins 4BT

... shape that was only produced by Ford for one year. That unqiue shape allowed it to clear the 4″ exhaust and front drive shaft since the NP205 transfer case sat so far back. Although the engine runs a factory H1 turbocharger, Zach also ...

4. Custom Widebody Fiero with a 700 HP Turbo 4G63

Thursday, 19 May 2016 Content / engineswapdepot.com / Custom Widebody Fiero with a 700 HP Turbo 4G63

... foam which was shaped to get the right design. Then he made the final pieces out of fiberglass. Keeping the power to the ground are 275/35-18 wheels on every corner which are covering 12″ Corvette C4 brakes. Mike has also built a custom ...

5. Ford Falcon XR6 Turbo Ute – Part 5

Monday, 02 May 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 5

... hour, this thing was really taking shape fast. Luckily Porter has a few plumber mates to call on when it comes to running the hard fuel lines. Mat from Baxter Performance Plumbing (BPP) was on hand to knock out the fuel system, he was born ...

6. 2010 Camaro with a Duramax V8

Sunday, 01 May 2016 Content / engineswapdepot.com / 2010 Camaro with a Duramax V8

... Texas which was a theft recovery. The engine, transmission and some other powertrain components were stolen. Besides a broken quarter window the car was in good shape. After purchasing the Camaro Nathan took the car back to his company One to ...

7. Ford Falcon XR6 Turbo Ute – Part 4

Monday, 25 April 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 4

Ford Falcon XR6 Turbo Ute – Part 4 | Part 4 is here! In this update we see the cooling system take shape, along with intercooler piping and some interior upgrades. Previous instalments: Part 1 – Part 2 – Part 3 All text and images ...

8. 1985 Dodge Ram with a 5.9 L Cummins

Sunday, 24 April 2016 Content / engineswapdepot.com / 1985 Dodge Ram with a 5.9 L Cummins

... owner showed up with a 1985 “Franklin” Dodge Ram W350 dually in very good condition. The body was in such decent shape the only metal repair needed was the driver’s side floorboard under the pedals. The owner liked the design ...

9. Ford Falcon XR6 Turbo Ute – Part 3

Saturday, 23 April 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 3

... flow rate. This rear end is really starting to take shape, linking the fuel cell and the rear suspension pickups into the roll cage is going to generate rigidity in the rear end. The next step is to get some bars mounted for the rear tub. Compared ...

10. Ford Falcon XR6 Turbo Ute – Part 2

Saturday, 23 April 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 2

... the entire roll cage design, get this one wrong and the rest of the bars will also be out of alignment. The key to a great roll cage is to keep it to the same shape as the roof line. Having done many hoops in his time, Grubbo got this one spot ...