Search

1. Electric Mercedes 190SL

Thursday, 14 August 2025 Content / engineswapdepot.com / Electric Mercedes 190SL

... electric motor capable of 180 kW (241 hp) and 360 Nm (265 lb-ft) of torque. Behind the motor ECC installed a gear-reduction unit and custom driveshaft connected to the factory Mercedes rear axle. The engine bay also houses two radiators; one ...
... electric motor capable of 180 kW (241 hp) and 360 Nm (265 lb-ft) of torque. Behind the motor ECC installed a gear-reduction unit and custom driveshaft connected to the factory Mercedes rear axle. The engine bay also houses two radiators; one ...

2. Carbon Fiber Alfa Romeo

Wednesday, 20 January 2021 Content / engineswapdepot.com / Carbon Fiber Alfa Romeo

... throttle bodies and runs on a MoTeC M1 ECU. A close-ratio five-speed manual transmission sends power through a lightweight driveshaft to a titanium rear axle with a limited-slip differential. The car stops thanks to a Superleggera six-piston ...
... throttle bodies and runs on a MoTeC M1 ECU. A close-ratio five-speed manual transmission sends power through a lightweight driveshaft to a titanium rear axle with a limited-slip differential. The car stops thanks to a Superleggera six-piston ...

3. VW Touareg with a 2JZ-GTE

Monday, 05 September 2016 Content / engineswapdepot.com / VW Touareg with a 2JZ-GTE

... and produces 321 horsepower. Since the SUV was converted to RWD the transfer case, front differntial and axles were removed. Everything else has been kept unmodified including the suspension, subframe, rear end, steering, cooling system, and ...
... and produces 321 horsepower. Since the SUV was converted to RWD the transfer case, front differntial and axles were removed. Everything else has been kept unmodified including the suspension, subframe, rear end, steering, cooling system, and ...

4. For Sale: Project Rollsmokey

Tuesday, 23 August 2016 Content / engineswapdepot.com / For Sale: Project Rollsmokey

... Cylinder New Inner and Outer Tie Rods New Idler Arm New Drag Link Rear End: Dana 60 Richmond Gear 3.54 Gears Eaton Detroit Truetrac Differential Yukon 1541H Alloy Axles 35 Spline 1350 Billet Yoke All new bearings/seals etc. Professionally built 3.5 ...
... On a nice turbo the engine makes 300 horsepower and 760 lb-ft of torque at the wheels on 32 psi of boost. Behind the engine sits a RH47 four-speed automatic transmission and a Dana 60 rear end with 3.54 gears. If you have wanted to own a piece ...

5. 1947 Dodge Power Wagon 6×6 with a 4BT

Tuesday, 19 July 2016 Content / engineswapdepot.com / 1947 Dodge Power Wagon 6×6 with a 4BT

... all with 4.11 gears. Under normal road driving only the rear two axles are powered and the 4BT gave an impressive 25 mpg average over a 3,000 mile trip. Source: Harwood Motors via BangShift | 2016-07 | Christopher Christopher ...
... all with 4.11 gears. Under normal road driving only the rear two axles are powered and the 4BT gave an impressive 25 mpg average over a 3,000 mile trip. Source: Harwood Motors via BangShift | 2016-07 | Christopher Christopher ...

6. Pro-street 1982 VW Vanagon with a Mid-engine V8

Tuesday, 12 July 2016 Content / engineswapdepot.com / Pro-street 1982 VW Vanagon with a Mid-engine V8

... full spool with 5.29 gears and Strange 31 spline axles. Getting the power to the ground is a Competition Engineering 4-Link rear frame and suspension with Mickey Thompson Sportsman Pro 29×18.5×15. The owner says the transmission ...
... full spool with 5.29 gears and Strange 31 spline axles. Getting the power to the ground is a Competition Engineering 4-Link rear frame and suspension with Mickey Thompson Sportsman Pro 29×18.5×15. The owner says the transmission ...

7. Custom Toyota Corona with a 1UZ

Monday, 11 July 2016 Content / engineswapdepot.com / Custom Toyota Corona with a 1UZ

... from a 1992 Lexus SC400. In the back he installed a Speedway Engineering quick-change solid axle. The front suspension uses upper and lower unequal A-arms with Carrera shocks and AFCO springs. The rear suspension is a three-link with a Watts ...
... from a 1992 Lexus SC400. In the back he installed a Speedway Engineering quick-change solid axle. The front suspension uses upper and lower unequal A-arms with Carrera shocks and AFCO springs. The rear suspension is a three-link with a Watts ...

8. V12 From Two Toyota I6 Engines Update 6

Thursday, 07 July 2016 Content / engineswapdepot.com / V12 From Two Toyota I6 Engines Update 6

... a lot of work such as modifying the frame and upper shock mounts and moving the radiator, intercooler and brake ducts. It also required new rear axles and sway bar arms. The builder asked an artist to create 3d renders of the final body design. ...
V12 From Two Toyota I6 Engines Update 6 | Our favorite home-built V12 project is back with two updates. Since our previous article the builder has decided to increase the rear wheel size from 28×12 to 31×16. This change required ...

9. 1952 Buick Super Riviera called Bombshell Betty

Wednesday, 29 June 2016 Content / engineswapdepot.com / 1952 Buick Super Riviera called Bombshell Betty

... 9″ rear end with 2.73 gears. The front suspension has been sourced from a 1968 Chevy Van with a dropped axle narrowed to 11″ and solid mounted. The rear suspension was taken from a 1973 Ford Thunderbird. Source: Dupont Registry ...
... 9″ rear end with 2.73 gears. The front suspension has been sourced from a 1968 Chevy Van with a dropped axle narrowed to 11″ and solid mounted. The rear suspension was taken from a 1973 Ford Thunderbird. Source: Dupont Registry ...

10. Citroen C2 with Twin V6 Engines

Tuesday, 14 June 2016 Content / engineswapdepot.com / Citroen C2 with Twin V6 Engines

... axle has been welded to lock the differential. The engines are kept in sync with an ECU that allows for a bias of up to 500 rpm difference. Source: PistonHeads (build thread) | 2016-06 | Christopher Christopher | Article | engineswapdepot.com ...
... of 388 horsepower and 394 lb-ft of torque. The front engine sits on a pair of custom mounts while the rear engine sits on a reversed Peugeot 406 subframe. Both engines run their factory five-speed transmissions with custom driveshafts. The rear ...