Search

1. Group 5 Inspired BMW E21

Sunday, 17 July 2016 Content / engineswapdepot.com / Group 5 Inspired BMW E21

... Group 5 BMW E21. When finished the car will be powered by a built 2.5 L M50 inline-six with forged internals and a dry sump oil system. The engine is expected to produce 600 horsepower thanks to a Steve Murch custom twin scroll Holset HRC35 ...
Group 5 Inspired BMW E21 | Richard Pykett is a personal insurance salesman by day but a race car engineer by night. Out of his garage in Auckland, New Zealand Richard is transforming a BMW E21 into a race car inspired by Faltz Motorsport’s ...

2. Toyota 86 with a VR38DETT

Thursday, 14 July 2016 Content / engineswapdepot.com / Toyota 86 with a VR38DETT

... using a Full Blown Motorsports conversion kit. When completed the 86 will still retain a full interior, stereo and include an aftermarket AC system from RenCool. It will be used for a combination of time attack, roll racing, and street. Full ...
... It was almost three times taller than the FA20 engine. The solution was to use a Dailey Engineering kit to switch the engine to a dry sump oiling system and convert it to RWD by removing the front differential. This reduced the height by six ...

3. 1964 Chevy C-10 with a LSx

Tuesday, 12 July 2016 Content / engineswapdepot.com / 1964 Chevy C-10 with a LSx

... horsepower thanks to a Mast Motorsports camshaft, valve springs and ECM. The engine was installed using generic LSx mounts and Holley’s accessory drive, oil pan, and Hooker exhaust manifolds. Behind the engine is a TCI built 4L60E four-speed ...
... horsepower thanks to a Mast Motorsports camshaft, valve springs and ECM. The engine was installed using generic LSx mounts and Holley’s accessory drive, oil pan, and Hooker exhaust manifolds. Behind the engine is a TCI built 4L60E four-speed ...

4. Nissan 350Z with a Turbo VR6

Wednesday, 04 May 2016 Content / engineswapdepot.com / Nissan 350Z with a Turbo VR6

... The oil pan also needed to be notched for clearance. The owner wanted a lot of power so the engine was upgraded with a ported big valve head, Ross pistons, Cunningham rods, Tectonic Tuning 276 camshafts, LS3 ignition coils and a BorgWarner ...
... asking price of $25,000. He is also open to trades of equal value. Source: My350Z (build thread) and SEO Motorsports FB page via ESD readers Chris and Ñathanael | 2016-05 | Christopher Christopher | Article | engineswapdepot.com ...

5. Budget Build 6.0 L LQ9

Friday, 29 April 2016 Content / engineswapdepot.com / Budget Build 6.0 L LQ9

... 670 Ultra Carb $615 COMP Camshaft $407 Fel-Pro Master Gasket Kit $380 Holley Oil Pan $375 MSD Coil Control $357 COMP Spring Kit $329 Machine Shop $290 Holley LS Carb Intake $256 COMP lifters $224 ARP Engine Assy Kit $210 ARP ...
Budget Build 6.0 L LQ9 | SuperChevy posted an article showing a budget build 6.0 L LQ9. These iron-block truck motors produce 345 horsepower at 5,200 rpm and 380 lb-ft of torque at 4,000 rpm from the factory. The SuperChevy crew were able to ...

6. Coyote Swap Kit for Classic Fords

Monday, 11 April 2016 Content / engineswapdepot.com / Coyote Swap Kit for Classic Fords

... Aluminator motor$28,600 XS Aluminator computer$3,080 XS Aluminator air intake$440 XS Aluminator starter motor$550 Ford Racing 6 speed auto $9,900 RRS engine mounts$850 RRS custom sump & pick up$1,350 Twin fan radiator and hoses$450 Reservoir ...
... 1968-71 Montego. RRS has finished components ready for sale including engine mounts, under dash brake booster, shock tower notching kit, upper control arm and coil over struts, powered/manual rack and pinion, and frame rail supports. Products ...

7. Mazda Miata Ecotec Swap Kits

Thursday, 31 March 2016 Content / engineswapdepot.com / Mazda Miata Ecotec Swap Kits

... (mounts and oil pan) or just the mounts for $299. The kit is made for 1990-2005 Miata (either five-speed or six-speed transmissions) and the 2.4L LE5 Ecotec inline-four. The LE5 produces 200 hp and can make as much as 300 hp and 300 lb-ft with ...
Mazda Miata Ecotec Swap Kits | MT Motorsport in Ontario, Canada just released their new swap kit for Ecotec powered Mazda Miata. The kits are being sold by Ecotec Miata and you can purchase the complete kit for $1,899, partial kit for $999 ...

8. Vega Wagon with a Vortec 4200

Sunday, 27 March 2016 Content / engineswapdepot.com / Vega Wagon with a Vortec 4200

... 4.2 L Vortec 4200 (LL8) could do he set out to use one. The engine itself is pretty big so Jared had to design and build his front chassis, suspension and steering. The engine also required custom headers and modifying the oil pan and pickup. ...
... On stock internals and naturally aspirated the engine produced 256 horsepower and 252 lb-ft of torque. Backing up the engine is a two-speed Powerglide transmission and Ford 9″ with 4.86 gears. Jared had a lot of work dialing the motor ...

9. Jeep Cherokee with a 1UZ-FE

Monday, 01 February 2016 Content / engineswapdepot.com / Jeep Cherokee with a 1UZ-FE

... custom exhaust headers, custom motor mounts, and pushing the firewall back about 1/2″. The firewall only needed modification because the owner didn’t want to move the transmission forward and have to purchase a new driveshaft. Source: ...
... was able to be used with the 1UZ after the using a input shaft, planet ring gear, front pump, and bellhousing from a A340E transmission. Other modifications required were switching to a SC400 rear sump oil pan to clear the steering linkage, ...

10. 1988 Ford Ranger with a RB20DET

Sunday, 20 December 2015 Content / engineswapdepot.com / 1988 Ford Ranger with a RB20DET

... and installed it in the only space he had, the wheel well. The final step to get his intercooler to work was converting the inlet and outlet from 2 3/8″ to 2 1/2″. Another issue that arose from the swap was the oil filter location. ...
1988 Ford Ranger with a RB20DET | Jesse Davis took the engine from a 1988 Ford Ranger to use in another project. After that the truck sat for a year until he made a deal with a good friend to buy it but only if Jesse swapped a non-factory motor ...