Search

1. For Sale: 1994 Supra with a 1UZ

Tuesday, 10 May 2016 Content / engineswapdepot.com / For Sale: 1994 Supra with a 1UZ

... car was also missing an engine and transmission. Instead of returning the car back to factory spec the owner decided to go a different route using a 1998 Lexus LS400 as a donor for all the major components. The 4.0 L 1UZ-FE V8, four-speed A340E ...
... car was also missing an engine and transmission. Instead of returning the car back to factory spec the owner decided to go a different route using a 1998 Lexus LS400 as a donor for all the major components. The 4.0 L 1UZ-FE V8, four-speed A340E ...

2. 1985 Dodge Ram with a 5.9 L Cummins

Sunday, 24 April 2016 Content / engineswapdepot.com / 1985 Dodge Ram with a 5.9 L Cummins

... so much that he sent it to Deboss Garage to swap over all the major components from the 1992 Ram. To start Deboss cut the front frame rails off the 1992 Ram and turned them into templates to drill holes for the proper alignment on the 1985 ...
... so much that he sent it to Deboss Garage to swap over all the major components from the 1992 Ram. To start Deboss cut the front frame rails off the 1992 Ram and turned them into templates to drill holes for the proper alignment on the 1985 ...

3. For Sale: The First V8 Swapped Porsche In The World

Tuesday, 08 December 2015 Content / engineswapdepot.com / For Sale: The First V8 Swapped Porsche In The World

... garage. The story of behind this car is a really interesting. It all starts with a brand new 1966 Porsche 912 being purchased and then stolen the next year. The car was recovered without its engine and some other components and was sold to ...
... has been in this near same form, it looks great. The front nose, front fenders, rear fenders, trunk and engine lid are all Mitcom Porsche 934 fiberglass. There are some chips, cracks and flaws in the nose, but nothing major enough to need ...

4. Ferrari F40 LM Restoration Part 5

Saturday, 03 January 2015 Content / build-threads.com / Ferrari F40 LM Restoration Part 5

... yes, camera crew were in attendance so video and better pics to follow in due course. And for posterity! Meanwhile on the mould front, major progress and James is back on the project applying Silicon sealer to the mould flanges ...
... to ensure the motor is properly bedded in.After that we will fit the new injectors and return to the dyno for a full power session, turning up the boost and revs, as right now we have kept it low so as to minimise stress on all components. We ...

5. Ferrari F40 LM Restoration Part 3

Friday, 29 August 2014 Content / build-threads.com / Ferrari F40 LM Restoration Part 3

... I get to check on line. One major milestone in my absence, a totally complete and hopefully functioning transmission. How is it that Ferraris mechanical components, particularly engines and transmissions, just look right? You look back ...
... James starting work on the Air Jack system, radiator and brake lines. Second shot shows the line from the rad at the front to the coolant header tank. Once the plumbing is over the two major outstanding issues will be electrics and the engine ...

6. Ferrari F40 LM Restoration

Tuesday, 06 August 2013 Content / build-threads.com / Ferrari F40 LM Restoration

... on our ‘reverse engineered reverse’ from Crosthwaites.Meanwhile, major delivery from Michelotto ‘expected’ early next week which means we can really start to move forward. Well whilst we are somewhat stuck ...
... Apparently the anti roll bars etc are due to leave Italy today and the brakes etc tomorrow. We shall see, but all being well, we might have all these vital components within a week or so and then we can really crack on, at least with the chassis ...

7. Breakdown of Ken Block’s Gymkhana Fiesta

Sunday, 05 August 2012 Content / engineswapdepot.com / Breakdown of Ken Block’s Gymkhana Fiesta

Breakdown of Ken Block’s Gymkhana Fiesta | Watch Ken Block’s chief engineer explain the modifications done to Ken Block’s Ford Fiesta to get a 600 horsepower Ford Focus engine under the hood. He also talks about other major components. ...
Breakdown of Ken Block’s Gymkhana Fiesta | Watch Ken Block’s chief engineer explain the modifications done to Ken Block’s Ford Fiesta to get a 600 horsepower Ford Focus engine under the hood. He also talks about other major components. ...