Search

1. VW Touareg with a 2JZ-GTE

Monday, 05 September 2016 Content / engineswapdepot.com / VW Touareg with a 2JZ-GTE

... and produces 321 horsepower. Since the SUV was converted to RWD the transfer case, front differntial and axles were removed. Everything else has been kept unmodified including the suspension, subframe, rear end, steering, cooling system, and ...
... and produces 321 horsepower. Since the SUV was converted to RWD the transfer case, front differntial and axles were removed. Everything else has been kept unmodified including the suspension, subframe, rear end, steering, cooling system, and ...

2. Nissan R32 with a VR38DETT

Tuesday, 16 August 2016 Content / engineswapdepot.com / Nissan R32 with a VR38DETT

... direction with the Skyline. Not only did he want to make more power but he also wanted the car to be different than everything else out there. So he decided to install a 3.8 L Nissan VR38DETT V6 with two Garrett 4202 turbochargers. The engine ...
... direction with the Skyline. Not only did he want to make more power but he also wanted the car to be different than everything else out there. So he decided to install a 3.8 L Nissan VR38DETT V6 with two Garrett 4202 turbochargers. The engine ...

3. Ford Falcon XR6 Turbo Ute – Part 1

Friday, 22 April 2016 Content / build-threads.com / Ford Falcon XR6 Turbo Ute – Part 1

... go, replacing it with an IRS system. This isnt going to be a simple job to do, basically he is going to have to cut the rear end off the car and replace it with someone else’s rear end, making sure everything like the diff, wheels and ...
... go, replacing it with an IRS system. This isnt going to be a simple job to do, basically he is going to have to cut the rear end off the car and replace it with someone else’s rear end, making sure everything like the diff, wheels and ...

4. Building a Custom 1932 Ford with a Twin-turbo Ferrari V8

Monday, 14 December 2015 Content / engineswapdepot.com / Building a Custom 1932 Ford with a Twin-turbo Ferrari V8

... else that has come before it. Alan started with a fiberglass 1932 Ford three-window body. Then with help from Rich Evans took a 1929 Model A frame which was boxed and had custom motor and body mounts installed. On that frame goes a front ...
Building a Custom 1932 Ford with a Twin-turbo Ferrari V8 | The ’32 Ford is a popular starting point for many hot rod and custom builds because of its timeless design. Alan Lee is planning on setting his three-door coupe apart from everything ...

5. Carbon Fiber 1965 Mustang with a LS7

Sunday, 08 November 2015 Content / engineswapdepot.com / Carbon Fiber 1965 Mustang with a LS7

Carbon Fiber 1965 Mustang with a LS7 | This 1965 Mustang is called Espionage and was built by the Ringbrothers. Technically speaking the only thing left original on this car is the window glass. Everything else has been built custom including ...
Carbon Fiber 1965 Mustang with a LS7 | This 1965 Mustang is called Espionage and was built by the Ringbrothers. Technically speaking the only thing left original on this car is the window glass. Everything else has been built custom including ...

6. Project 510: Short Shifting

Friday, 10 July 2015 Content / build-threads.com / Project 510: Short Shifting

... edge of the shifter. Since we used a 10mm spacer plate on the gearbox, that measurement had to increase to 60mm for everything to work in harmony. First, a line was scribed around the lower section of the shifter to mark a clean cut line. Cue ...
... of my gearbox, and then extend my shifter (beneath the pivot) by a matching 10mm. This will give me a shifter throw reduction of 30%. Something else I was keen on doing was getting rid of the bulky vibration isolator that is present on all modern ...

7. A Tale of Three Lotii

Monday, 11 May 2015 Content / build-threads.com / A Tale of Three Lotii

... choice cutting, of course) 11.5″ wheels with 315 tyres should be enough to get the power down. I spy…Porsche brakes! Please note soon to be eradicated wheel gap. More custom air suspension, because how else are you going to do it? The ...
... and interior re-trims? I’ve mentioned before how much I love seeing once pampered classics being torn down and fettled with as they become more affordable, and these three examples truly embody the guiltless “modify everything regardless of ...

8. Project Honda City Turbo II – Exhaust, interior, FINITO!

Sunday, 26 April 2015 Content / build-threads.com / Project Honda City Turbo II – Exhaust, interior, FINITO!

... the cigarette lighter either. Not a major issue but it irks me. Everything else works fine. Tony made a blanking plate for our antenna delete. I really like it. Bumper back on! The car goes to Tony’s tonight to strip the sound deadening. ...
... think our Honda could’ve been more out of place. There were about 20 cars in the yard and almost everything had an LS V8 in it, most of them twin turbo. I was put in touch with Adam at MPW by an old friend in Sydney. He seemed totally ...

9. Watch The 48 Hour Corvette Get A 650 HP LS7

Tuesday, 10 March 2015 Content / engineswapdepot.com / Watch The 48 Hour Corvette Get A 650 HP LS7

... else they are The guys who brought you the 48 Hour Camaro build are back but this time building an amazing 1972 Corvette. The power for this beast will come from a 649 horsepower Lingenfelter built LS7. For everything else they are installing ...
Watch The 48 Hour Corvette Get A 650 HP LS7 | The guys who brought you the 48 Hour Camaro build are back but this time building an amazing 1972 Corvette. The power for this beast will come from a 649 horsepower Lingenfelter built LS7. For everything ...

10. Honda J-series V6 Miata Swap Kit

Wednesday, 04 March 2015 Content / engineswapdepot.com / Honda J-series V6 Miata Swap Kit

... Tec supplies you with everything else you need in the kit and the transmision, driveshaft, diff, radiator, and everything else can be kept stock. Source: Mini TecOriginal: Engine Swap Depot | 2015-03 | Christopher Christopher | 2015-06 | ...
... Tec supplies you with everything else you need in the kit and the transmision, driveshaft, diff, radiator, and everything else can be kept stock. Source: Mini TecOriginal: Engine Swap Depot | 2015-03 | Christopher Christopher | 2015-06 | ...