Search

1. Ford Ranger 4×4 with a Cummins 4BT

Tuesday, 21 June 2016 Content / engineswapdepot.com / Ford Ranger 4×4 with a Cummins 4BT

... help. Covering those winches will be custom front and rear bumpers built by Zach. There are a few things still left to such as install larger injectors, change the fuel pin and governor spring in the fuel pump, replacing the factory head bolts ...

2. 1978 Camaro with a Supercharged LS3

Tuesday, 24 May 2016 Content / engineswapdepot.com / 1978 Camaro with a Supercharged LS3

... Fiberglass front, hood, doors, trunklid, and bumpers found their way on the Camaro. To complete the appearance change he made the rear window smaller and added a 1970 steel rear panel with signature four brake lights. The engine has been ...

3. VW 412 with a Porsche 911 Engine

Wednesday, 13 January 2016 Content / engineswapdepot.com / VW 412 with a Porsche 911 Engine

... When life hands you wider wheels… you make wider fenders. The owner then figured if he was widening the fenders why not also use the styling and bumpers from a Porsche 930 as well. At this point the car was given the name VW 612 RS. ...

4. Mercedes 190E Wrapped Around a C36 AMG

Monday, 26 October 2015 Content / engineswapdepot.com / Mercedes 190E Wrapped Around a C36 AMG

... looks match the performance the team has installed a 190 EVO 2 body kit. This includes fender flares, bumpers, side skirts and rear wing. I can’t wait for this project to be finished and racing around the track. Source: Piper Motorsport ...

5. Mercedes 190E Wrapped Around a C63 AMG

Monday, 26 October 2015 Content / engineswapdepot.com / Mercedes 190E Wrapped Around a C63 AMG

6. Builder Spotlight: Matt Clark

Thursday, 22 October 2015 Content / build-threads.com / Builder Spotlight: Matt Clark

... were replaced with six pound fiberglass units. Also, the front and rear steel bumpers were removed and the hatch and hood were replaced with fiberglass units. Lastly, the wheels were upgraded to period-correct, lightweight Watanabe wheels. Driving ...

7. Honda N600 with a Interceptor Motorcyle Engine

Thursday, 24 September 2015 Content / engineswapdepot.com / Honda N600 with a Interceptor Motorcyle Engine

... modification to get it to fit. The suspension is out of a 1st generation Mazda Miata that has been narrowed 9.5″. The front and rear bumpers are narrowed 1967-1968 Camaro bumpers. Seats are from a 1st generation Polaris RZR that still ...

8. 1986 Buick Grand National with a Twincharged LSA

Monday, 21 September 2015 Content / engineswapdepot.com / 1986 Buick Grand National with a Twincharged LSA

... It will also be needed when Todd changes up the front suspension dynamics. Body modifications were very subtle. They included rolled inner fenders, front wheel well extensions, smoothed bumpers and the rear wing was extended one inch. The only ...

9. 1964 Buick Sport Wagon With A LS6

Wednesday, 27 May 2015 Content / engineswapdepot.com / 1964 Buick Sport Wagon With A LS6

... owner had the car painted in Marlin Blue with a Silver painted roof and bumpers. The car stayed that way for about two years before the air ride suspension was replaced by coil overs. After getting the car handling and looking great, the owner ...

10. Project Honda City Turbo II – Exhaust, interior, FINITO!

Sunday, 26 April 2015 Content / build-threads.com / Project Honda City Turbo II – Exhaust, interior, FINITO!

... using plastic filler primer on the the front bumper after sanding down the rough spots. He’s working on both bumpers again today, blocking them back, laying down more filler primer followed by colour and clear. And more primer on the ...