Search

1. Carbon Fiber Alfa Romeo

Wednesday, 20 January 2021 Content / engineswapdepot.com / Carbon Fiber Alfa Romeo

... front brakes with 300 mm rotors and Superleggera two-piston rear brakes with 267 mm rotors. The brakes are covered by a set of GTA Superleggera 15×7-inch alloy wheels with Michelin Primacy 4 195/55/R15 tires. Inside the cabin you will find ...

2. For Sale: Project Rollsmokey

Tuesday, 23 August 2016 Content / engineswapdepot.com / For Sale: Project Rollsmokey

... Cylinder New Inner and Outer Tie Rods New Idler Arm New Drag Link Rear End: Dana 60 Richmond Gear 3.54 Gears Eaton Detroit Truetrac Differential Yukon 1541H Alloy Axles 35 Spline 1350 Billet Yoke All new bearings/seals etc. Professionally built 3.5 ...

3. Motus V4 powered Lancer Marine Boat

Thursday, 03 March 2016 Content / engineswapdepot.com / Motus V4 powered Lancer Marine Boat

... invented by New Zealand inventor Barry Davies. The boat was built by Lancer Marine in Auckland, New Zealand with an alloy underside specifically for testing the Dpulsar system. Just listen to the Motus V4’s 165 horsepower and 123 lb-ft ...

4. EG Civic / S15 Silvia – Buttoning things up

Wednesday, 29 October 2014 Content / build-threads.com / EG Civic / S15 Silvia – Buttoning things up

... alloy fuel tank fabricated. Then we work our way along the We’re already up to Part 5 of the Impossible Fabrications / Nulon EG Civic build. In this installment we start at the back of the car to see the rear suspension framework finalised, ...

5. Project Honda City Turbo II – Bringing the engine home

Friday, 24 October 2014 Content / build-threads.com / Project Honda City Turbo II – Bringing the engine home

... managed to source one of these unusual filters from New Zealand. The previous owner was using a filter that only covered the larger section with a bit of thin alloy sheet glued to it to cover up the other section. Not the best idea. As it stands ...

6. 1993 Supra With A RB26DETT

Friday, 27 June 2014 Content / engineswapdepot.com / 1993 Supra With A RB26DETT

... from the ad. 1993 Toyota Supra MK4, RB26DETT custom engine swap, 92,000kms, 18″ Veilside 3 piece alloys, A/M ground effects, Brembo brake covers, Power FC commander stand alone ECU, HKS coil over suspension, GTR intercooler, A/M gauges, ...

7. VR HSV Senator LSX454

Friday, 14 February 2014 Content / build-threads.com / VR HSV Senator LSX454

... cast alloys, except much wider. It’s a subtle touch, but speaks volumes of the owners taste direction with the car. Thanks to Ismail for submitting. Click here for more builds of Australian cars. CLICK HERE for ...

8. Ferrari F40 LM Restoration

Tuesday, 06 August 2013 Content / build-threads.com / Ferrari F40 LM Restoration

... seems to be out on this) and as I plan on keeping this car a long time, we decided we did not want to have to take her apart again in a few years time, so we wanted to do better and evolve. Also as the US cars had alloy tanks, this was hardly ...

9. Project 510: FMIC + more (pt 4)

Wednesday, 20 March 2013 Content / build-threads.com / Project 510: FMIC + more (pt 4)

... form of black paint was the fuel rail. I painted this in a metalic grey colour called ‘cast alloy’. Satin black was the colour choice for the throttle body. Throttle body pieces all cleaned up, including the butterfly. You can ...

10. Project 510: FMIC + more (pt 1)

Sunday, 17 March 2013 Content / build-threads.com / Project 510: FMIC + more (pt 1)

... block-off plates much thicker than mine. With that weighing on my conscious I found some 5mm alloy and re-made the block-off plate. Re-making things will be a common theme in this update. I’m not a mechanic, my day job sees me sitting ...