Search

1. Acura NSX with a Supercharged C32

Tuesday, 07 June 2016 Content / engineswapdepot.com / Acura NSX with a Supercharged C32

... all the modifications on the NSX and then opens it up at Horse Thief Mile. Below is the full project’s video playlist starting with the first video. Source: Clarion Builds and Clarion FB page | 2016-06 | Christopher Christopher | Article ...
... The team installed a Stop Tech Big Brake kit with four pistons calipers inside a set of Rays Volk Racing ZE40 wheels with Michelin Pilot Sport Cup 2 tires. Downforce fiberglass fenders were installed to help make room for the bigger wheels. AutoWave ...

2. For Sale: 1994 Supra with a 1UZ

Tuesday, 10 May 2016 Content / engineswapdepot.com / For Sale: 1994 Supra with a 1UZ

... the rear wheels through a Supra twin-turbo open differential rear, driveshafts and hubs. The engine has been converted to run off LPG (liquefied petroleum gas) from a 45 L tank in the trunk. Source: PistonHeads via Driftoy | 2016-05 ...
... the rear wheels through a Supra twin-turbo open differential rear, driveshafts and hubs. The engine has been converted to run off LPG (liquefied petroleum gas) from a 45 L tank in the trunk. Source: PistonHeads via Driftoy | 2016-05 ...

3. Nissan 350Z with a Turbo VR6

Wednesday, 04 May 2016 Content / engineswapdepot.com / Nissan 350Z with a Turbo VR6

... asking price of $25,000. He is also open to trades of equal value. Source: My350Z (build thread) and SEO Motorsports FB page via ESD readers Chris and Ñathanael | 2016-05 | Christopher Christopher | Article | engineswapdepot.com ...
... S363 turbocharger. This combo was good for 550 horsepower to the wheels but the engine is strong enough to handle 700+ horsepower. All the factory Nissan gauges work perfectly because the owner was able to use the factory wiring harness with ...

4. Jaguar XJ8L with a LS3

Wednesday, 30 March 2016 Content / engineswapdepot.com / Jaguar XJ8L with a LS3

... give the car a better power-to-weight ratio than a F-Type. Another really cool upgrade was the open-gate T-56 Magnum six-speed transmission. Karl says there is about $38K in parts on this build. Watch below as Matt really enjoys himself. Source: ...
... it should have been. Karl started by replacing the factory 4.0 L V8 with a 6.2 L LS376/525 crate engine that received a Lingenfelter LS9 head conversion. This increased power to 575 horsepower at the crank or 488 horsepower to the wheels and ...

5. 1942 Dodge Power Wagon with a Cummins 4BT

Tuesday, 22 December 2015 Content / engineswapdepot.com / 1942 Dodge Power Wagon with a Cummins 4BT

1942 Dodge Power Wagon with a Cummins 4BT | Winslow Bent from Legacy Classic Trucks stopped by Jay Leno’s Garage to show off a custom project. The project started life as a 1942 Dodge WC63 which was a six-wheel drive, open cab troop transport ...
1942 Dodge Power Wagon with a Cummins 4BT | Winslow Bent from Legacy Classic Trucks stopped by Jay Leno’s Garage to show off a custom project. The project started life as a 1942 Dodge WC63 which was a six-wheel drive, open cab troop transport ...

6. For Sale: The First V8 Swapped Porsche In The World

Tuesday, 08 December 2015 Content / engineswapdepot.com / For Sale: The First V8 Swapped Porsche In The World

... setup!!! She is a MONSTER! The factory Porsche team were out testing prior to race at the same Raceway some time later with their fancy-shamancy RSR. With Rod’s talented wife behind the wheel, the car was only 0.3 seconds off the pace ...
... to something more pump gas friendly, but also to allow for a car that while fast on the track will be just as easy to drive to the local car show or around town. The cam is a 519/280 intake and 534/295 exhaust grind. However, with intake opening ...

7. For Sale: Chris Jeanneret’s Turbo K24 Powered Honda S2000

Tuesday, 10 November 2015 Content / engineswapdepot.com / For Sale: Chris Jeanneret’s Turbo K24 Powered Honda S2000

... of torque to the rear wheels. To see more photos and videos please visit our previous article on Chris’ S2000 here. Source: Chris Jeanneret via Wrecked Magazine | 2015-11 | Christopher Christopher | Article | engineswapdepot.com | Engineswapdepot ...
... to $102,625 total. He has reduced the price to $75,000 due to depreciation and sounds open to offers. The Honda S2000 is powered by a K24A1 and with a Garrett GTX4088R turbocharger running 34 psi of boost produces 852 horsepower and 706 lb-ft ...

8. 1973 Toyota Celica with a Twin-turbo 1UZ-FE

Tuesday, 29 September 2015 Content / engineswapdepot.com / 1973 Toyota Celica with a Twin-turbo 1UZ-FE

... into such a small engine bay restricted airflow which caused overheating issues. To open the engine bay up for more room and thus better cooling Steve completely rebuild the entire front end. The subframe and suspension would be converted to ...
... comes from a Toyota 1UZ-FE V8 sourced from a 1992 Celsior. These engines are very strong and take boost very well with little modification. Steve’s completely stock engine produced 573 horsepower to the wheels from a single Precision 6262 ...

9. Project 510: Short Shifting

Friday, 10 July 2015 Content / build-threads.com / Project 510: Short Shifting

... aspect I didn’t like was that the new shifter position was much lower than before. I really wanted to have the gearknob higher up, closer to the steering wheel, it almost felt like I was leaning down into the middle of the car when changing ...
... I really wanted to ensure there was still enough movement to actually enjoy changing gears, not just a tiny little flick of the wrist. The feel is mechanical and precise, and once I got out on the open road on my way home, I found myself looking ...

10. Project Honda City Turbo II – Exhaust, interior, FINITO!

Sunday, 26 April 2015 Content / build-threads.com / Project Honda City Turbo II – Exhaust, interior, FINITO!

... our problem! So stoked. This is the auto choke mechanism. There’s a plunger inside that opens and closes the choke based on coolant temperature. Ours was staying permanently open so when the car was warm it was running really ...
... from behind the heater core. We refitted the fuse box, steering column, dash wiring, gauge cluster, steering wheel and driver’s seat so that the car can be started and driven if running properly. Then it was onto a trailer for the gentle ...