Search

1. MGA with a Supercharged Coyote V8

Monday, 22 August 2016 Content / engineswapdepot.com / MGA with a Supercharged Coyote V8

... six-speed transmission, Milner Off Road Racing CV drive shaft, and Strange Engineering 9″ rear end with a 12-bolt drop out. Although this is their second time at Bonneville it is only their first time competing. Their previous attempt ...

2. International Fire Truck with a Ford 460 ci V8

Thursday, 04 August 2016 Content / engineswapdepot.com / International Fire Truck with a Ford 460 ci V8

... factory chassis and replacing it with a 1978 Ford F-350 dually chassis. On that he installed an air bag suspension on dropped I-beams up front and a back halfed rear with a Chassis Engineering ladder bar and heavy-duty panhard bar. The roof ...

3. BMW M6 with a Six-rotor Engine

Sunday, 31 July 2016 Content / engineswapdepot.com / BMW M6 with a Six-rotor Engine

... Race Engineering produced 813 horsepower and 530 lb-ft of torque to the wheels. If you wonder how a six-rotor sounds then watch these. Source: Quinton Meyer FB album and Automotive Obsession FB page via Crossbred Nation FB page | 2016-07 ...

4. Porsche 914 with a Subaru EJ22

Wednesday, 20 July 2016 Content / engineswapdepot.com / Porsche 914 with a Subaru EJ22

Porsche 914 with a Subaru EJ22 | A young man from Colorado has been documenting his journey working on a Subaru-powered 1973 Porsche 914. He purchased the car with a Subaru EJ22 flat-four already installed using a Kennedy Engineering conversion ...

5. Toyota 86 with a VR38DETT

Thursday, 14 July 2016 Content / engineswapdepot.com / Toyota 86 with a VR38DETT

... It was almost three times taller than the FA20 engine. The solution was to use a Dailey Engineering kit to switch the engine to a dry sump oiling system and convert it to RWD by removing the front differential. This reduced the height by six ...

6. Pro-street 1982 VW Vanagon with a Mid-engine V8

Tuesday, 12 July 2016 Content / engineswapdepot.com / Pro-street 1982 VW Vanagon with a Mid-engine V8

... full spool with 5.29 gears and Strange 31 spline axles. Getting the power to the ground is a Competition Engineering 4-Link rear frame and suspension with Mickey Thompson Sportsman Pro 29×18.5×15. The owner says the transmission ...

7. Custom Toyota Corona with a 1UZ

Monday, 11 July 2016 Content / engineswapdepot.com / Custom Toyota Corona with a 1UZ

... from a 1992 Lexus SC400. In the back he installed a Speedway Engineering quick-change solid axle. The front suspension uses upper and lower unequal A-arms with Carrera shocks and AFCO springs. The rear suspension is a three-link with a Watts ...

8. Mercedes-Judd SLK340

Thursday, 09 June 2016 Content / engineswapdepot.com / Mercedes-Judd SLK340

... from a LMP2. The engine weighs 115 kg (253 lb) and produces 610 horsepower and 430 Nm (317 lb-ft) of torque. A Cosworth ECU was used to control the engine and for data acquisition. Power goes from the engine through a Sachs Race Engineering ...

9. Acura NSX with a Supercharged C32

Tuesday, 07 June 2016 Content / engineswapdepot.com / Acura NSX with a Supercharged C32

... installed a CT Engineering Comptech supercharger kit which adds 60+ hp giving the engine a total output of 350 whp and 380 lb-ft of torque. Under the car the suspension was upgraded with KW Variant 3 coilovers front and back with CT sway bars. ...

10. BMW E30 with a Turbo S54

Sunday, 29 May 2016 Content / engineswapdepot.com / BMW E30 with a Turbo S54