... weighing 70 kg (154 lb) less than a steel body. The company further reduces weight in the suspension with titanium upper and lower control arms, titanium hubs, and titanium wheel studs and nuts. They also install their GTA-R “Big Spindle” billet ...
Alfaholics is a company in Clevedon, England that specializes in Alfa Romeo 105 series parts and performance. The company recently debuted their newest project called the GTA-R 300 Carbon. The project starts with a custom carbon fiber body ...
... weighing 70 kg (154 lb) less than a steel body. The company further reduces weight in the suspension with titanium upper and lower control arms, titanium hubs, and titanium wheel studs and nuts. They also install their GTA-R “Big Spindle” billet ...

... case 2.93 LSD. Everything on this car was thoughtfully modified to allow for maintenance. To compensate for the extra power both the suspension and brakes were upgraded. The owner is also offering extra parts such as a airbag steering wheel, ...
... case 2.93 LSD. Everything on this car was thoughtfully modified to allow for maintenance. To compensate for the extra power both the suspension and brakes were upgraded. The owner is also offering extra parts such as a airbag steering wheel, ...
For Sale: BMW E30 with a M62 V8 | This 1991 BMW 318is is up for sale in Milwaukee, Wisconsin. The owner spent 2 years and around 1,000 hours swapping a complete E39 powertrain and getting everything to work properly. Powering the car is a 4.3 ...

... at LDS Fabrication to build a custom subframe by combining parts from a R31 and S13 crossmember. LDS Fabrication also built a custom transmission crossmember, custom 3″ stainless steel exhaust and one-piece intercooler pipe. Nissan ...
Nissan Skyline R31 with a SR20DET | Joe Gisler really enjoyed his 1989 Honda Prelude 4WS but unfortunately there wasn’t a lot of off-the-shelf part support in his area. So after selling it he set off to build something that would be easier ...
... still needs to install the interior, blow-off valve, sort out the gauges and decide which wheels to use. Future plans for the Skyline include boosting power by upgrading the cams, injectors, and a S15 turbocharger. Source: StanceWorks (build ...

... it should have been. Karl started by replacing the factory 4.0 L V8 with a 6.2 L LS376/525 crate engine that received a Lingenfelter LS9 head conversion. This increased power to 575 horsepower at the crank or 488 horsepower to the wheels and ...
... give the car a better power-to-weight ratio than a F-Type. Another really cool upgrade was the open-gate T-56 Magnum six-speed transmission. Karl says there is about $38K in parts on this build. Watch below as Matt really enjoys himself. Source: ...
... it should have been. Karl started by replacing the factory 4.0 L V8 with a 6.2 L LS376/525 crate engine that received a Lingenfelter LS9 head conversion. This increased power to 575 horsepower at the crank or 488 horsepower to the wheels and ...

VW 412 with a Porsche 911 Engine | The Norwegian owner of this Volkswagen 412 had always dreamed of owning one with a Porsche 911 engine ever since he saw his first as a young boy. Then a friend pointed him to one that had already setup for ...
... Porsche wheels to compliment the choice in power. The owner wanted to run a set of Ruf 8×17 wheels which are very difficult to find. A friend of a friend was selling a set of Ruf wheels but they turned out to be 9×17 and 10×17. ...
... As if Porsche themselves had taken a Volkswagen body off the assembly line and used it to create their own performance wagon. The interior also includes parts from Porsche. The dash is from a 911 and the seats are taken from a 996. Recently ...